How do you set up Xlink Kai
-
- Level 1: Deer Hunter
- Posts: 2
- Joined: Wed Feb 09, 2011 2:14 am
- Xlink Kai Setup?: no
How do you set up Xlink Kai
I really don't know how to set up Xlink Kai, looking for some tips.
8923KenRob
-
- site admin
- Posts: 1766
- Joined: Wed Aug 18, 2010 9:23 pm
- Xlink Kai Setup?: yes
- Xlink Kai username: lazyhobobum
- Location: west coast usa
- Contact:
Re: How do you set up Xlink Kai
First of all make sure you download and install version 7.3.1.7 of Xlink kai. The newer versions do not work with Playstation 2. Go here to download this version:
http://www.teamxlink.co.uk/forum/viewto ... 7475524de3
What you will have to do is setup a static IP address on your PC and then go into your router's menu and port forward port 30000 to your PC's Static IP address. Unless your router has UPnP enabled which might mean you won't have to port forward.
Xlink Kai likes wires. Meaning that it works best when an ethernet cord is running from your router to your PC and another cord is running from your PS2 to your router. You can use wireless internet to your PC and just run a wire from your PC to the PS2 but that requires doing some extra work.
I don't want to confuse you too much if you have not read anything about setting this up yet.
Please go to Xlink Kai's homepage and read the "FAQ" that is linked at the top of the page there:
http://www.teamxlink.co.uk
That should answer most of your questions. If you still need help post back in this thread.
http://www.teamxlink.co.uk/forum/viewto ... 7475524de3
What you will have to do is setup a static IP address on your PC and then go into your router's menu and port forward port 30000 to your PC's Static IP address. Unless your router has UPnP enabled which might mean you won't have to port forward.
Xlink Kai likes wires. Meaning that it works best when an ethernet cord is running from your router to your PC and another cord is running from your PS2 to your router. You can use wireless internet to your PC and just run a wire from your PC to the PS2 but that requires doing some extra work.
I don't want to confuse you too much if you have not read anything about setting this up yet.
Please go to Xlink Kai's homepage and read the "FAQ" that is linked at the top of the page there:
http://www.teamxlink.co.uk
That should answer most of your questions. If you still need help post back in this thread.